Konica Minolta Darwin VDP Software User Manual
Page 44
Page 44 of 92
T EC - I T B a r c o d e So f t w a re R e f e re n c e
6.1.77 UPC Version A, 5 Digits Add-On
Symbology number:
36
Valid characters:
“0”..”9”, 16 digits + 1 check digit
Quiet zone:
left: 9-12X, right: 5X
Module width:
see UPC-A
Standard print ratio:
see UPC-A
Ratio format:
see UPC-A
Default check digit:
UPC-A (eCDUPCA)
Possible check digits:
User supplied
Symbol size:
see UPC-A
7
25272
72070
12345
Identical to UPC-A but with 2 add-on digits. The check digit will be calculated automatically if it is
not specified in the input data (e.g. 72527272070
7
12345), The check digit is not displayed in the
human readable text.
6.1.78 UPC Version E
Symbology number:
37
Valid characters:
“0”..”9”, 7 digits + 1 check digit
Quiet zone:
left: 9X, right: 7X
Module width:
--
Standard print ratio:
1:2:3:4:1:2:3:4
Ratio format:
1B:2B:3B:4B:1S:2S:3S:4S
Default check digit:
UPC-E (eCDUPCE)
Possible check digits:
User supplied
Symbol size:
--
0
123456
5
UPC-E is used for product marking and article bar-coding. The c
ode must begin with “0” or “1”. The
check digit is computed automatically if it is not specified in the input data (that is when only 7 digits
are used for creating the code).
6.1.79 UPC Version E, 2 Digits Add-On
Symbology number:
38
Valid digits:
“0”..”9”, 9 digits + 1 check digit
Quiet zone:
left: 9-12X, right: 5X
Module width:
see UPC-E
Default check digit:
see UPC-E
Ratio format:
see UPC-E
Check digit method:
UPC-E (eCDUPCE)
Possible check digits:
User supplied
Symbol size:
--
0
123456
12
This code is identical to UPC Version E, but with 2 add-on digits. The check digit will be calculated
automatically if not specified in the input data (e.g. 0123456
5
12). The check digit is not displayed in
the human readable text.