Konica Minolta Darwin VDP Software - Manual (Page 61)

Page 61 of 92
T EC - I T B a r c o d e So f t w a re R e f e re n c e
6.3.9 HIBC LIC Codablock F
Symbology number: 110
Valid characters: “0”..”9”, “A”..”Z”, “-“, “.”, Space, “*”, “$”, “/”,
“+”, “%”
Quiet zone: left/right/ top/bottom: 10X
Module width: X>=0.19mm
Print ratio: 1:2:3:4:1:2:3:4
Ratio format: 1B:2B:3B:4B:1S:2S:3S:4S
Default check digit: Modulo 43 (eCDMod43)
Size: 2 - 44 rows; 4 - 62 characters per row
. . . . . . . . .
HIBC LIC Codablock F is based on the stacked symbology Codablock F. The data format
corresponds to the HIBC LIC Format described above. An additional modulo 43 check digit is
required.
6.3.10 HIBC PAS 128
Symbology number: 100
Valid characters: “0”..”9”, “A”..”Z”, “-“, “.”, Space, “*”, “$”, “/”,
“+”, “%”
Quiet zone: left/right: 10X, min. ¼ inch
Module width: X >= 0.19 mm
Standard print ratio: 1:2:3:4:1:2:3:4
Ratio format: 1B:2B:3B:4B:1S:2S:3S:4S
Default check digit: Modulo 43 (eCDMod43)
Symbol size: --
*+/EU9C83416F/Z34H159$*
HIBC PAS 128 is based on the symbology Code 128. The data format corresponds to the HIBC
PAS Format described above. An additional modulo 43 check digit is required.
6.3.11 HIBC PAS 39
Symbology number: 101
Valid characters: “0”..”9”, “A”..”Z”, “-“, “.”, Space, “*”, “$”, “/”,
“+”, “%”
Quiet zone: left/right: 10X, min. ¼ inch
Module width: X >= 0.19 mm
Standard print ratio: 1:3:1:3
Ratio format: 1B:2B:1S:2S
Default check digit: Modulo 43 (eCDMod43)
Symbol size: H>=15% of L (H>=6.3 mm!)
H: Height of the barcode without human
readable text
L: width of the barcode
*+/1DI9876E*
*+/2931A1EZ*
HIBC PAS 39 is based on the symbology Code 39. The data format corresponds to the HIBC PAS
Format described above. An additional modulo 43 check digit is required.