Konica Minolta Darwin VDP Software - Manual (Page 63)

Page 63 of 92
T EC - I T B a r c o d e So f t w a re R e f e re n c e
6.3.15 HIBC PAS MicroPDF417
Symbology number: 109
Valid characters: “0”..”9”, “A”..”Z”, “-“, “.”, Space, “*”, “$”, “/”,
“+”, “%”
Quiet zone: left/right: 1X
Module width: --
Print ratio: 1:2:3:4:5:6:1:2:3:4:5:6
Ratio format: 1B:2B:3B:4B:5B:6B:1S:2S:3S:4S:5S:6S
Default check digit: Modulo 43 (eCDMod43)
Size: --
. . . . . . . . . . . . . .
HIBC PAS MicroPDF417 is based on the 2D symbology MicroPDF417. The data format
corresponds to the HIBC PAS Format described above. An additional modulo 43 check digit is
required.
6.3.16 HIBC PAS Codablock F
Symbology number: 111
Valid characters: “0”..”9”, “A”..”Z”, “-“, “.”, Space, “*”, “$”, “/”,
“+”, “%”
Quiet zone: left/right/ top/bottom: 10X
Module width: X>=0.19mm
Print ratio: 1:2:3:4:1:2:3:4
Ratio format: 1B:2B:3B:4B:1S:2S:3S:4S
Default check digit: Modulo 43 (eCDMod43)
Size: 2 - 44 rows; 4 - 62 characters per row
. . . . . . . . .
HIBC PAS Codablock F is based on the stacked symbology Codablock F. The data format
corresponds to the HIBC PAS Format described above. An additional modulo 43 check digit is
required.