Konica Minolta Darwin VDP Software User Manual
Page 59
Page 59 of 92
T EC - I T B a r c o d e So f t w a re R e f e re n c e
In following you find a list of the bar code symbologies that are able to encode HIBC.
6.3.3
HIBC LIC 128
Symbology number:
98
Valid characters:
“0”..”9”, “A”..”Z”, “-“, “.”, Space, “*”, “$”, “/”,
“+”, “%”
Quiet zone:
left/right: 10X, min. ¼ inch
Module width:
X >= 0.19 mm
Standard print ratio:
1:2:3:4:1:2:3:4
Ratio format:
1B:2B:3B:4B:1S:2S:3S:4S
Default check digit:
Modulo 43 (eCDMod43)
Symbol size:
--
*+A99912345/99Ø151ØX3M*
HIBC LIC 128 is based on the symbology Code 128. The data format corresponds to the HIBC LIC
Format described above. An additional modulo 43 check digit is required.
6.3.4
HIBC LIC 39
Symbology number:
99
Valid characters:
“0”..”9”, “A”..”Z”, “-“, “.”, Space, “*”, “$”, “/”,
“+”, “%”
Quiet zone:
left/right: 10X, min. ¼ inch
Module width:
X >= 0.19 mm
Standard print ratio:
1:3:1:3
Ratio format:
1B:2B:1S:2S
Default check digit:
Modulo 43 (eCDMod43)
Symbol size:
H>=15% of L (H>=6.3 mm!)
H: Height of the barcode without human
readable text
L: width of the barcode
*+A123BJC5D6E71G*
*+83278F8G9HØJ2G%*
HIBC LIC 39 is based on the symbology Code 39. The data format corresponds to the HIBC LIC
Format described above. An additional modulo 43 check digit is required.
6.3.5
HIBC LIC Data Matrix
Symbology number:
102
Valid characters:
“0”..”9”, “A”..”Z”, “-“, “.”, Space, “*”, “$”, “/”,
“+”, “%”
Quiet zone:
left/right/ top/bottom: 1X
Module width:
--
Print ratio:
1:1
Ratio format:
1B:1S
Default check digit:
Modulo 43 (eCDMod43)
Size:
.001 till 14.0 square inch
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
HIBC LIC Data Matrix is based on the 2D symbology Data Matrix. The data format corresponds to
the HIBC LIC Format described above. An additional modulo 43 check digit is required.