Konica Minolta Darwin VDP Software - Manual (Page 46)

Page 46 of 92
T EC - I T B a r c o d e So f t w a re R e f e re n c e
8 Reserved for future use
9 Is used only to signify a variable content shipment. The 9 indicates to the scanner that a mandatory
variable content add-on symbol follows the primary symbol.
Table 16: Shipping Container Symbol Packaging Indicator
6.1.82 USD-4
This symbology is identical with Codabar 2 Widths and is also known as Code 2 of 7 and as NW-7.
6.1.83 USPS OneCode 4-State Customer Barcode
Symbology number: 85
Valid characters: “0”..”9”, 20 digits + 0, 5, 9, or 11-digit ZIP
Code.
Quiet zone: vertical: 1/25 inch
horizontal: 1/8 inch
Module width: --
Standard print ratio: 1:1
Ratio format: 1B:1S
Default check digit: Automatic (symbology specific).
Symbol size: Up to 31 digits
This symbology is also known as
 OneCode 4CB
 USPS 4CB
 4-CB
 4-State Customer Barcode
 USPS OneCode Solution Barcode.
The following data is encoded:
 Barcode ID (1st digit: 0-9; 2nd digit: 0-4)
 Special services (range: 000-999)
 Customer ID (range: 000000-999999)
 Sequence number (range: 000000000-999999999)
 Delivery point ZIP code (0, 5, 9, or 11-digit ZIP code)
6.1.84 USPS Postnet 5
Symbology number: 40
Valid characters: “0”..”9”, 5 digits + 1 check digit
Quiet zone: vertical: 1/25 inch
horizontal: 1/8 inch
Module width: --
Standard print ratio: 1:1
Ratio format: 1B:1S
Default check digit: POSTNET (eCDPostNet)
Symbol size: 5 digits, 1 check digit
123455
This code is used by the United States Postal Services for mass-mailing applications. Encoded are
a 5 digit ZIP-code. The check digit is calculated automatically. It cannot be specified in the input
data.
The barcode height should be adjusted to 3.2 mms; the module width to 0.423 mms; usually no
plain text is displayed.