Konica Minolta Darwin VDP Software - Manual (Page 89)

Page 89 of 92
T EC - I T B a r c o d e So f t w a re R e f e re n c e
Appendix C: Barcode Quiet Zones
The information contained in this chapter is subject to be changed without notification. We are sorry,
but we cannot guarantee that all information is error-free. TEC-IT Datenverarbeitung GmbH is not
liable for any damages or lost profits if somebody relies on the information in this chapter.
We recommend the following quiet zones to be used with the listed bar code symbologies. Please
consider that quiet zones often depend on a specific label format, so please hold on to your
specification (if you have one).
The “X” stands for module width (narrow bar width).
C.1 Linear Symbologies
No. Barcode Symbology Vertical quiet zone Horizontal quiet zone
top bottom left right
63 Australian Post Customer
2 mm 6 mm
64 Australian Post Customer 2
65 Australian Post Customer 3
68 Australian Post Redirection
66 Australian Post Reply Paid
67 Australian Post Routing
18 CodaBar – 10X
2 Code 2 of 5 Standard / Code 2 of 5 Matrix
– 10X, min. ¼ inch
6 Code 2 of 5 Data Logic
4 Code 2 of 5 IATA
7 Code 2 of 5 Industrial
3 Code 2 of 5 Interleaved
1 Code 11 – 10X
8 Code 39
– 10X, min. ¼ inch
9 Code 39 Extended
25 Code 93
– 10X, min. ¼ inch
62 Code 93 Extended
20 Code 128
– 10X, min. ¼ inch
59 Code 128 Subset A
60 Code 128 Subset B
61 Code 128 Subset C
22 Deutsche Post Identcode
see Code 39
21 Deutsche Post Leitcode
10 EAN-8 2
–
7X
11 EAN-8 with 2 digits add-on 2
add-on:
7-10X
add-on:
5X 12 EAN-8 with 5 digits add-on 2
13 EAN-13 2
–
11X 7X
14 EAN-13 with 2 digits add-on 2
add-on:
7-10X
add-on:
5X 15 EAN-13 with 5 digits add-on 2
72 EAN-14 see EAN-128
16 EAN-128 – 10X, min. ¼ inch
2 In TEC-IT software the quiet zones for this symbology are included in the barcode generation algorithm. You need no extra
adjustments.