Olympus D-220L-D-320L Digital Cameras - Manual (Page 130)

3
OK
3
SET OK
130
E
RANDOM PRINT
You can select a series of pictures to be direct-printed.
1 Connect to the printer, turn on the power, then press the
Function button in the Display mode to select the Random
Print mode.
2 Select frames with the Previous (–)/Next (+) button and
press the OK button at each picture to be printed.
Ⅲ When the OK button is pressed for three seconds, the
camera produces a beep sound and enters the All-
Frame print mode. When the button is held down for
another two seconds, the camera produces the beep
sound again and erases the selection data.
3 Enter the number of copies to be printed on the printer,
then press the DIRECT PRINT button to start printing.
Ⅲ See page 128 for connection to the printer.
◆ This mode is available only when the camera is
connected to the P-300U exclusive printer.
◆ The data for the Random Print are stored in the
card even after printing.
◆ Canceling the Print mode or turning off the
power erases the data.
◆ The use of the optional AC adapter is
recommended.
Note:
Press for 3 seconds — All print
Press for 5 seconds — All cancel
Touche maintenue enfoncée durant 3 secondes :
impression de toutes les données.
Touche maintenue enfoncée durant 5 secondes :
effacement de toutes les données.
Presione durante 3 segundos — Impresión completa
Presione durante 5 segundos — Cancelación de la
impresión