Olympus E-20N - Manual (Page 119)

117
7
Displaying the Histogram
A histogram can display the distribution of brightness of the image displayed for
playback. The histogram feature is switched on with a menu selection.
The histogram allows you to confirm the balance of a photo image after shooting.
Switching the histogram display on and off
Follow this procedure to switch the histogram display on or off.
1
Set the mode dial to the setup/
connection mode mark
.
2
Press the menu button .
The menu is displayed on the monitor.
3
On the arrow pad, press or
to move the green highlight to the
histogram mark
.
4
On the arrow pad, press to
move the green highlight to the
right.
5
On the arrow pad, press to
move the green highlight to ON.
If you want to switch off the histogram, just
leave OFF selected.
6
Press the button to select the
setting.
The green highlight returns to the
histogram mark
.
Press the button again to close the
menu.
Note
• If the camera is connected to a computer with
a USB cable, the menu is not displayed.
Disconnect the USB cable from the camera.
3
4 5
ON
OFF
2
1
6