Olympus E-20N - Manual (Page 151)

149
9
Displaying Images on a TV Screen
After connecting the camera to a television with the provided video cable, you can use
the TV screen to display images of pictures taken with the camera. To conserve battery
power, we recommend connecting the optional AC adapter to the camera when the
camera is connected to a TV.
1
Make sure that the camera and the
television are switched off.
If the camera power switch is set to ON,
move it to OFF.
2
Open the camera connector cover
and insert one end of the video
cable to the video OUT jack on the
camera.
3
Insert the other end of the video
cable to the video IN jack of the
television.
4
Switch on the television, and select
the Video IN channel.
5
Set the camera mode dial to
playback
.
6
Set the camera power switch to
ON.
The image of picture is displayed on the
TV screen.
Images off-center on the TV screen?
With some TV sets, the images could appear slightly off center, or you may see portions of image
missing at the edges or lines.
Images appear with black frame?
In order to display the entire image, the image on the TV screen is reduced to a size slightly smaller
than the TV screen. Because of this, a black frame appears around the displayed image. If you print
the image from the TV using a video printer, this frame is also printed with the image.
Viewing pictures, index display, enlarged display (
➞ 44)
Note
• The brightness of the image displayed on a TV screen cannot be adjusted with controls on the
camera.
• This feature is not available in some regions.
• While images are displayed on the TV screen, nothing is displayed in the monitor.
• Video signal is either NTSC or PAL compatible depending on the video standard in the intended
area of distribution.
2
1
ON
OFF
3
5
6
4
ON
OFF
To television video
IN jack