Olympus E-20N - Manual (Page 183)

181
12
Disconnecting the USB cable
Follow this procedure to remove the memory card and disconnect the USB cable from the
camera. Incorrect procedure could cause the computer to hang up. If the system does
hang up, disconnect then connect the USB cable again, or re-start the computer.
Windows 98/98SE
1
Confirm that the card access lamp
on the camera is off.
2
Double-click the My Computer icon
on the desktop, and then right-click
camera drive icon “Removable
Disk” to open the pop-up menu.
3
From the pop-up menu, select
Eject.
4
Check that the card access lamp
on the camera is off, then set the
camera power switch to OFF.
5
Disconnect the USB cable.
1
Card access lamp
4 ON
OFF