Olympus E-20N - Manual (Page 52)

50
1 ON
OFF
Switching the Camera Off
Always switch the camera off immediately after every shooting session. If you leave the
camera on while it is not being used, it will automatically enter the sleep mode and then
automatically switch itself off after one hour. (
➞ 136) Always switch the camera off before
changing batteries or before storing the camera in a case or bag.
1
Move the power switch to OFF.
The camera switches off.
If an image is being saved on a card (the
card access lamp will be blinking), the
camera will not power off until the image
has been saved on the card.
2
Attach the lens cap.
Press inward on the cap’s latches, fit the
cap over the lens, and then release the
latches. (To remove the cap: Press on the
latches and pull the cap off.)
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Caution
• While the card access lamp is blinking, never open the card cover or unplug the AC adapter. If the
power supply to the camera is interrupted while the camera is saving a picture on a card, this
could cause the camera to reset all operation mode settings (date, time, etc.), could damage
images already stored on the card, or could prevent other pictures from being saved on the card.
2