Olympus E-20N - Manual (Page 154)

152
Copying Images to Another Card
With two types of cards installed in the camera at the same time, you can copy images
from one card to the other. The copied images are not deleted from the original card
after copying is completed.
Copying all images to another card
You can copy all images from a source card, provided the target card has sufficient space to store
the copied images.
1
Insert the copy source and target
cards in the camera. (
➞ 24)
2
Check the control panel display
and make sure that the mark for
the source card, SmartMedia
or
CompactFlash/Microdrive , is
displayed.
If the mark is not displayed, press and
hold down the SM/CF memory card
button, and then turn the main dial or sub
dial until it is displayed.
3
Set the mode dial to playback .
The last picture taken is displayed.
4
Press the menu button .
The menu is displayed on the monitor.
5
On the arrow pad, press or
to move the green highlight to the
copy mark
.
6
On the arrow pad, press to
move the green highlight to ALL.
7
Press the button.
COPY? is displayed.
Check the display and make sure that the
source and target selections are correct. If
the selections are reversed, with NO
selected press the
button, and then
start again from Step 2.
Displays the mark
for the source card Control panel
2
4
9
3 ON
OFF
5
6
7