Olympus E-20N - Manual (Page 14)

12
Viewfinder
Monitor Display (During Shooting)
Pressing the button repeatedly switches the information displayed at the bottom of the monitor
in this order: Information Display
➞ Shooting Distance Display ➞ Display Off.
Shooting distance
➞ 68
Displaying Image Information
➞ 146
AF correct mark
➝ 64
After half-pressing
shutter button,
blinks until subject
is in focus, and then
lights when subject
is in focus. Does not
blink or light when
camera is in manual
focus mode.
Flash warning
➝ 37
Blinks to warn you that flash is
required for the shot when built-
in flash is closed (pressing the
flash button raises the built-in
flash), blinks while the flash is
charging, and lights when flash
is fully charged.
AF target mark
➝ 34
Position this mark on the subject that
you want to focus.
White balance
➞ 104, 105, 107
Displays when the white
balance is not set to auto.
Macro
➝ 40
Shutter speed
➝ 74
Aperture
value
➝ 72
Metering mode
➝ 83
Center weighted
averaging metering
Spot metering
Nothing displayed for
digital ESP metering.
AE (Automatic
Exposure) Lock
➝ 85
Spot metering area
➝ 83
Indicates the area employed for spot metering
when camera is in spot metering mode .
Exposure compensation/
Exposure level
In the
P, A, and S modes
displays exposure
compensation value.
(
➝ 84)
In the M mode, displays
the exposure level (the
difference between the
selected and ideal
exposure levels).
(
➝ 77)
Flash warning
Macro
AF correct mark
Aperture value
Metering mode
Exposure compensation/
Exposure level
AE Lock
White balance Shutter speed
Important Parts and Names (continued)