Olympus E-20N - Manual (Page 96)

94
Using Flash Control Compensation
The camera can automatically adjust the flash intensity according to the brightness of
the subject, light reflected from the subject, and the camera-to-subject distance, and
because of this the image of a subject could appear too bright or too dark. In such cases
you can use flash control compensation to capture images that are not too bright or too
dark. Flash control may not have enough effect when using a high shutter speed.
1
Press the menu button .
The menu is displayed on the monitor.
2
On the arrow pad, press or
to move the green highlight to the
mark.
3
On the arrow pad, press to
move the green highlight to the
scale to the right of the flash
control mark
.
4
To increase or decrease the flash
intensity, press
or .
Every time you press or , the flash
compensation value changes in 1/3EV
steps through a range of
−2EV to +2EV.
2
3
1
4