Toshiba Dynadock W20 - Manual (Page 19)

User’s Manual EN-19
dynadock™ W20
Connect the power adaptor
1. Choose the proper plug to install the AC adaptor.
To install the AC adaptor replaceable plugs, see the illustrations below.
(Sample Illustration) Install the plugs
To remove the replaceable plugs, see the illustrations below.
(Sample Illustration) Remove the plugs
2. Plug the AC adaptor cord/cable into the DC-IN on the back of the
dynadock™.
(Sample Illustration) Connecting the AC adaptor cord to the dynadock™
1
2
2
1
1
2
2