Connection/docking – Toshiba Dynadock W20 User Manual
Page 52
EN-52
User’s Manual
dynadock™ W20
Connection/Docking
No sound outputs from
the dynadock™ audio
ports after I restart my
computer or after it
resumes from standby/
sleep/hibernation mode.
Manually enable the dynadock™ audio ports as
described in the section
.
After my computer is
restarted, the input
volume for the
microphone connected
to the dynadock™
reverts to the default
setting.
The computer’s operating system controls the
default volume after the system is restarted.
You will need to manually reset the volume to
the desired level after the system has restarted.
Sound is distorted or
delayed when playing
some multimedia files.
Disconnect the dynadock™ from your computer
and play the file again.
Problem(s)
Solution(s)
Problem(s)
Solution(s)
My computer does not
automatically detect the
Certified Wireless USB
adaptor.
Make sure you have properly connected the
adaptor to your computer.
Disconnect and then reconnect the adaptor.
The computer's USB port may be damaged.
Check to see if other devices can be
successfully connected to the port.
What is the difference
between connecting and
docking?
Connecting opens a line of communication
between the computer and the dynadock™, but
not between the computer and external devices
connected to the dynadock™.
Docking enables the computer to communicate
with devices connected to the dynadock™. The
computer can only be docked with one
dynadock™ at a time.