Toshiba Dynadock W20 - Manual (Page 32)

EN-32 User’s Manual
dynadock™ W20
Connecting/disconnecting the dynadock™ from your computer
Your computer can only be docked with one dynadock™ at a time. If you
have more than one dynadock™ within range of your computer, you may
want to temporarily prevent your computer from connecting wirelessly to a
particular dynadock™. To temporarily prevent your computer from
connecting wirelessly to a dynadock™:
n On the Devices tab of the Wireless USB Manager, click the green
button next to the dynadock icon. The button turns gray to indicate the
dynadock™ is in a non-connectable state. Click the button again to
allow connection.
To permanently remove the association between the dynadock™ and the
host radio:
n On the Devices tab of the Wireless USB Manager, right-click on the
dynadock icon and select Remove from the menu.
You can change the name of the each dynadock™ listed on the Devices
tab of the Wireless USB Manager. This is especially useful if you have
multiple dynadocks, to differentiate between them. To rename a
dynadock™, right-click on the default name, select Rename from the
shortcut menu, and then enter a custom name.
NOTE
If you permanently remove the device, you will not be able to
connect to that particular device again until the device has been
re-associated. To re-associate the device, follow the instructions in the
section
“Connect the dynadock™ to your computer” on page 23 .
NOTE