Toshiba Dynadock W20 - Manual (Page 28)

EN-28 User’s Manual
dynadock™ W20
Chapter 2
Using the dynadock™ and Adjusting
Settings
Undocking your computer
"Undocking" your computer stops all communications with the external
devices connected to the dynadock™. After you undock your computer, it is
safe to break the wireless connection between the computer and the
dynadock™.
To undock your computer, refer to the instructions in the section
“Connecting/disconnecting the dynadock™ from your computer” on
page 32
and “Disable/Enable radio communications” on page 34 .
To avoid losing data and/or damaging your computer and/or peripherals,
be sure to undock your computer from the dynadock™ as described in this
section before you do any one of the following:
n Disconnect the USB wireless adaptor from your computer.
n Move the computer outside of the operational range (approximately
10 meters/32 feet) of the wireless connection.
CAUTION