Toshiba Dynadock W20 - Manual (Page 29)

User’s Manual EN-29
dynadock™ W20
Re-connecting and docking your computer
To re-connect and dock your computer to the dynadock™ (upon returning
to your desk with your computer after a meeting, for example), do the
following:
n Make sure the wireless USB adaptor is properly connected or re-
connect the adaptor.
n Make sure the computer is within wireless communication range of the
dynadock™.
n Remove any obstructions between the computer and the dynadock™.
n If the computer is in standby/sleep/hibernation mode, press the
computer's power button to resume.
The wireless light on the front of the dynadock™ flashes green to
indicate docking is in progress and turns solid green when docking is
completed.
Using the dynadock™ software
This section provides information on using the following software to
manage the dynadock™ and adjust settings to suit your needs:
n Wireless USB Manager
n TOSHIBA dynadock video Utility
You can also refer to this section to learn how to uninstall the software.
Using the Wireless USB Manager
The Wireless USB Manager is the driver software for the Toshiba Certified
Wireless USB adaptor (included with certain models). This driver is
automatically installed when you run the dynadock Installation CD (see
“Install the software” on page 20 for more information).