Sharp R-1900M - Manual (Page 10)

9
Express Defrost with
Memory
* Suppose you want to cook with memory 0, which was
programmed for 10 minutes Express Defrost sequence,
Single Digit Input/Auto Start ON.
0
Procedure
1 Place food in oven.
Enter memory number.
Midway through the defrosting cycle, the CHECK
indicator will light in the display and an audible signal
will be heard unless signal volume has been set to Mute.
You may open the door, turn food over and shield any
warm portions. Close the door.
MANUAL OPERATION
NOTES:
1. Even though CHECK lights up in the display, your oven
continues defrosting and does not stop to check.
2. Press the START pad at step 2 to continue defrosting as
once the door is closed, cooking data will be canceled if
the START pad is not pressed within 3 minutes.
3. See HELPFUL TIP for Express Defrost on page 10.
Procedure
2 Press the START pad to continue
defrosting.
Time Cooking
Your oven can be programmed for up to 4 cooking sequences
and has 11 preset microwave power levels.
Maximum Cooking Time
Microwave 100% - 60%
Maximum of 60 minutes
Microwave 50% - 10% Maximum of 120 minutes
(Please see Maximum Cooking Time on page 21)
Microwave Power Level
Press the
POWER LEVEL PAD
once then press
POWER LEVEL
9
8
7
6
5
4
3
2
1
0
Display
APPROXIMATE
PERCENTAGE OF
POWER
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
Single Stage Cooking
* Suppose you want to cook for 2 minutes and 30 seconds
at 50%.
1 Place food in oven and press
the MANUAL/REPEAT pad.
Enter cooking time.
Procedure
2 Press the POWER LEVEL pad
and enter power level. 5
NOTES:
1. It is not necessary to press the POWER LEVEL pad for
100% in Single Stage Cooking.
2. If cooking time input is over the maximum allowed time,
error message EE9 will be displayed. Press the STOP/
CLEAR pad to clear the error message and reduce cooking
time or power level. For details, see Maximum Cooking
Time on page 21.
Multi Stage Cooking
* Suppose you want to cook for 1 minute at 70% power for
1st stage and then continue to cook for 2 minutes at 50%
power for 2nd stage and to cook for 3 minutes at 100%
power for 3rd stage.
Procedure
3 Press the START pad.
1 Place food in oven and press
the MANUAL/REPEAT pad.
Enter cooking time for 1st
stage.
Procedure
2 Press the POWER LEVEL pad.
Enter power level for 1st stage.
3 Press the MANUAL/REPEAT pad.
Enter cooking time for 2nd
stage.
7
1 0 0
2 3 0
2 0 0
R-1900M [EN].indd Sec1:9 R-1900M [EN].indd Sec1:9 7/4/09 9:50:01 AM 7/4/09 9:50:01 AM