Barco R9001490 - Manual (Page 25)

3-11
Installation Guidelines
5976072 BARCO ELM R12 17102000
A B
Image 19
Image 18
Rigging points and Accessories.
Optional Profile Sections
Two sets of Profile sections are available as option.
Slots are made in these profile sections for easy inserting the clamps and for easy adjusting the clamp position so that this position
matches with the rigging points.
Consult a professional structural engineer prior to suspending the ceiling mount from a structure not intended for that use. Always
ensure the working load limit of the structure supporting the projector.
When mounting the projector to the ceiling or to a rigging system, always mount security chains.
Fork lift Supports
A set of 4 fork lift supports are available to lift up the projector in an easy way. These supports are also provided with slot for inserting
rigging clamps.
To mount these supports, handle as follow :
1 Turn the projector onto its input side.
2 Slide the fork lift support (A) onto the provided socket (B).
3 Turn in the four bolt for each socket.