Barco R9001490 - Manual (Page 67)

7-14
Random Access Adjustment Mode
5976072 BARCOELM R12 17012000
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
ASPEC RATIO [4:3]
OPTIONS
Select with or
then <ENTER>
<EXIT> to return.
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
ASPEC RATIO [4:3]
OPTIONS
Select with or
then <ENTER>
<EXIT> to return.
Size
What can be done ?
The size can be adjusted in a vertical or horizontal way.
When adjusting the vertical size,
The upper side of the image is fixed (table and ceiling mounted configurations) and only the lower side can be moved to its exact
position.
When adjusting the horizontal size, the left side of the image is fixed and only the right side can be moved to its exact position.
To start up the size adjustment :
1 Push the cursor key é or ê to highlight 'Size' (menu 1).
2 Press ENTER to select.
3 Push the cursor key é or ê to size the image in a vertical direction. Push the cursor key ç or è to size the image in a horizontal
direction.
Example for table mount configuration
Horizontal size
adjustment
Vertical size
adjustment
Fixed sides
menu 1
Side Keystone
What can be done ?
The side keystone adjustment is used to align the image if the projector is mounted at a nonstandard projection angle.
Aligning the keystone
1 Push the cursor key é or ê to highlight 'Side Keystone'.
2 Press ENTER to select.
3 Push the cursor key ç or è to adjust the keystone of the image.
When the upper part of the image is wider than the lower part of the image, push the cursor key ç. The number indication below
the bar scale will be negative.
When the upper part of the image is smaller than the lower part of the image, push the cursor key è. The number indication
below the bar scale will be positive.
menu 1