Barco R9001490 - Manual (Page 86)

Service Mode
9-9 5976072 BARCOELM R12 05052000
Select with é or ê
then <ENTER>
<EXIT> to return.
I2C DIAGNOSIS
D C A
DECODER 12H # # #
MOTOR DRIVER 1AH # # #
LIGHT SENSOR 1CH # # #
LAMP DRIVER 20H # # #
LAMP DRIVER 22H # # #
POWER SUPPLY 30H # # #
INPUT SELECTOR 46H # # #
PMP INPUT SELECTOR 4AH # # #
INPUT SELECTOR 7EH # # #
LAMP MODULE A0H # # #
Scroll with é or ê
<EXIT> to return.
menu 1
menu 1
How to activate an add-in ?
1 Push the cursor key é or ê to highlight 'Add-Ins' (menu 1).
The Add-Ins menu will be displayed (menu 2)
2 Push the cursor key é or ê to highlight add-in.
3 Press ENTER to activate.
The Install Add-Ins menu will be displayed (menu 3).
4 Enter your personel key.
The key exists out of 16 alfanumeric characters.
5 To reprogram the key, use the cursor key й , к , з or è or the numeric keys for the digits.
When the entered key is correct, the indication 'Software : not activated' will change in 'activated'.
6 Press ENTER to confirm.
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
SERVICE
BARCO LOGO
RESET INPUT BALANCE
ADD-INS
I2C DIAGNOSIS
MORE...
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 2
ADD-INS
LIGHT SENSOR [ INACTIVE ]
Select with é or ê
Reprogram with й , к , з or è
<ENTER> to confirm
<EXIT> to return.
menu 3
INSTALL ADD-INS
LIGHT SENSOR
Key : xxxxxxxxxxxxxxxx
Hardware : OK
Software : Not activated
I2C diagnosis.
What can be seen ?
Gives an overview of the correct working of the I²C controlled IC's.
How to start the I2C diagnosis ?
1 Push the cursor key é or ê to highlight 'I2C diagnosis' (menu 1).
2 Press ENTER to display.
SERVICE
BARCO LOGO
PRESET INPUT BALANCE
ADD-INS
I2C DIAGNOSIS
MORE...