Barco R9001490 - Manual (Page 88)

Programmable Function Keys
10-1 5976070 BARCO ELM R12 05052000
10
PROGRAMMABLE FUNCTION KEYS
Programmable Function Keys
What can be done with these keys
The five function keys on top of an adapted remote control can be programmed as short cut keys (quick access) to almost any
adjustment menu.
How can a Function Key be programmed ?
A function key can only be programmed when in the adjustment mode.
Handle as follow :
1. Scroll through the menus until the desired menu is reached.
2. Press the desired function key for this menu during a few seconds.
A confirmation menu will be displayed (menu 1) : "<F1> will be used to quickly access this menu".
3. Press ENTER to confirm.
4. The function key is available in the operational mode.
CONFIRM
QUICK ACCESS
<F1> will be used
to quickly access
this menu.
<ENTER> to confirm
<EXIT> to cancel.
menu 1