Barco R9001490 - Manual (Page 72)

8-3
Installation Mode
5976072 BARCOELM R12 05052000
Configuration
What can be done ?
The way of physical installation of the projector can be defined to the projector.
The following installation configurations are possible :
- front/table
- front/ceiling
- rear/ceiling
- rear/table
Set up the Correct Configuration
1 Push the cursor key é or ê to highlight 'Configuration' (menu 1).
2 Press ENTER to select.
3 Push the cursor key é or ê to highlight the desired configuration.
4 Press ENTER to select.
For more information, see Projector configuration in chapter 4 : 'Installation Set Up'.
OSD COLOR
HIGHLIGHTED ITEM
RED
GREEN
YELLOW
OSD color (On-Screen Display)
What can be done ?
The highlighted items on the menus can be displayed in red, green or yellow.
How to change this color setting ?
1 Push the cursor key é or ê to highlight 'OSD Color' (menu 1).
2 Press ENTER to select.
3 Push the cursor key é or ê to desired color (menu 2).
4 Press ENTER to select.
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 2
No Signal
What will happen
If there is no signal connect to the projector,
- the background color can be black or blue and
- the projector can shutdown after a certain time.
menu 1
Select with é or ê
then <ENTER>
<EXIT> to return.
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
NO SIGNAL
LENS
QUICK ACCESS KEYS
MENU POSITION [DEFAULT]
menu 1
Select with é or ê
then <ENTER>
<EXIT> to return.
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
NO SIGNAL
LENS
QUICK ACCESS KEYS
MENU POSITION [DEFAULT]