Barco R9001490 - Manual (Page 46)

5-5
Getting Started
5976072 BARCOELM R12 17012000
LENS ADJUSTMENT ZOOM/FOCUS
ZOOM with é or ê
FOCUS with ç or è
<ENTER> to Shift
<EXIT> to return
LENS ADJUSTMENT SHIFT
SHIFT with é or к, з or è
<ENTER> to Shift
<EXIT> to return
TILT
Tilt with й , к
<ENTER> to Zoom/Focus
<EXIT> to return
Quick Lens Adjustment
For a quick lens set up and image shift, press the BARCO key, to display inmediately the zoom/focus menu.
Only available for motorized lenses.
For a quick set-up, handle as follow :
A. Zoom/focus of the lens.
1 Press the BARCO key.
The zoom/focus menu will be displayed.
2 Push the cursor key é or ê to zoom and ç and è to focus the image.
3 When finished, press EXIT key to return or ENTER to continue to the shift adjustment.
Other adjustment patterns are possible by pushing on the selection key.
The following other patterns are possible :
- the source itself
- hatch pattern
- 2 different focus patterns
B. Image shift
1 Press the selection key, BARCO key.
The zoom/focus menu will be displayed.
2 Press ENTER. The shift menu will be displayed.
3 Push the cursor key é or ê to shift the image up or down and ç and è to shift the image left and right.
4 When finished, press EXIT key to return or ENTER to continue to the tilt adjustment.
C. Tilt
1 Press the selection key, BARCO key.
The zoom//focus menu will be displayed.
2 Press ENTER. The shift menu will be displayed.
3 Press ENTER. The tilt menu will be displayed.
4 Push the cursor key é or ê to tilt the image.
5 When finished, press EXIT key to return.