Barco R9001490 - Manual (Page 76)

8-7
Installation Mode
5976072 BARCOELM R12 05052000
BRIDGE
Open with é
Close with ê
<EXIT> to return
Select with é or ê
then <ENTER>
<EXIT> to return.
LENS ADJUSTMENT
ZOOM/FOCUS
SHIFT
TILT
BRIDGE
OPTIONS
Bridge up or down
Before mounting a lens or replacing a lens, the lens bridge with the motors has to be moved to its highest position (bridge open). When
the lens is mounted, the bridge has to be set back on its working position (bridge closed).
1 Push the cursor key é or ê to highlight 'Bridge' (menu 1).
2 Press ENTER to select.
3 Push the cursor key é to open the bridge ê to close the bridge (menu 2).
menu 1
menu 2
Options
The zoom/focus and shift can be set the same for all files.
1 Push the cursor key é or ê to highlight 'Options' (menu 1).
2 Press ENTER to select.
The Lens Options menu will be displayed (menu 2).
3 Press ENTER to toggle between 'Yes' or 'No'.
[Yes] : all lens settings will be the same for all files.
[No] : different lens settings can be used for different files.
Default setting : [No]
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
LENS ADJUSTMENT
ZOOM/FOCUS
SHIFT
TILT
BRIDGE
OPTIONS
<ENTER> to toggle
<EXIT> to return.
menu 2
LENS OPTIONS
Use the same
zoom, focus and shift
of the lens
for all files ?
[No]
Quick Access Keys
What can be done ?
It is possible to get an overview of the programmed functions of the different function keys (only accessible with an adapted RCU).
How to get an overview ?
1 Push the cursor key é or ê to highlight 'Quick Access Keys' (menu 1).
2 Press ENTER to select.
The Quick Access Overview menu will be displayed (menu 2).
No functions are preprogrammed.
menu 1
Select with é or ê
then <ENTER>
<EXIT> to return.
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
NO SIGNAL
LENS
QUICK ACCESS KEYS
MENU POSITION [DEFAULT]
menu 2
Select with é or ê
then <ENTER>
<EXIT> to return.
QUICK ACCESS KEYS
<F1> :
<F2> :
<F3> :
<F4> :
<F5> :
<*> :
LENS ADJUSTMENTS
CLEAR ALL