Barco R9001490 - Manual (Page 30)

4-5
Connections
5976072 BARCOELM R12 05052000
Select with é or ê
then <ENTER>
<EXIT> to return.
Fixed RGB analog input (slot 1)
Slot 1 has RGB analog input terminals (BNC) with separate Horizontal and Vertical sync (RGBHV) or with composite sync input (RGBS).
Always use an interface when a computer and local monitor have to be connected to the projector.
Range of interfaces made by BARCO.
Universal analog interface. Order number : R9826100.
RGB 120 MHz analog interface. Order number : R9826570.
VGA interface Order number 120V : R9828079.
Order number 230V : R9828070
MAC interface Order number 120V : R9828059
Order number 230V : R9828050
MAGIK interface Order number 120V : R9828129
Order number 230V : R9828120
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
All input signals are always 75 ohm terminated, even in the "not selected" mode.
How to select input Slot 1
Key in 1 on the RCU or the local keypad.
Sync selection can be done on the 'Input slots' menu.
The horizontal sync input can be set as separate sync, as separate sync + video or as separate sync tri-level sync.
How to change the input slot setting
To change the input slot setting, handle as follow :
1. Press ADJUST or ENTER key to start up the Adjustment mode.
2 Push the cursor key é or ê to select Installation (menu1)
3 Press ENTER.
4 Press the cursor key é or ê to select 'Input Slots' (menu 2)
5 Press ENTER. The internal system will scan the inputs and displays the result in the 'Input Slots' menu.
6 Push the cursor key é or ê to select the first slot (menu 3).
7 Press ENTER key to toggle the input signal priority.
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
NO SIGNAL
LENS
INPUT SLOTS
Slot Module type [Config]
1. RGB-SS [CV]
2. RGB-SOG
3. Video [Video]
4. Component Video
5. SDI
6. SDI
Select with é or ê
<ENTER> to toggle
<EXIT> to return.
Select with é or ê
<ENTER> to toggle
<EXIT> to return.
WD9@PDIQVU
9,'(2 69,'(2 R G B H / C V
On
98 2 7 910
R G B H / C V
On
High Bandwidth RGB ANALOG INPUT
R G B H / C V
On
High Bandwidth 5 CABLE INPUT
OUT IN
On
984
0 110
T9DÃ9DBDU6GÃDIQVU
OUT IN
On
984
0 110
T9DÃ9DBDU6GÃDIQVU
COM M PO RT TRIGGER OUT RS232/422 OUT RS232/422 IN
IR-Recei ver Diagnosti c Code Green Operation
Red Stand-by
IR Sync OK Hardwi red
remote
CTRL 1
Hardwi red
remote
CTRL 2 Two way
hardwi red
remote
CTRL 3
21
2))
7 C
B S
W
DIQ DIQ
DIQVU
ÃDIU@SA68@Ã
RGB analog input : 5 x BNC
Red : 0.7 Vpp ± 3 dB
Blue : 0.7 Vpp ± 3 dB
Green : 0.7 Vpp ± 3 dB
Vert. sync : 1 Vpp to 4 Vpp ± 3 dB
Hor. sync / Composite sync :
1 Vpp to 4 Vpp ± 3 dB
menu 1 menu 2 menu 3