Banner Registration Mark Sensor R58 Expert - Manual (Page 2)

Park Lane, Culliganlaan 2F
1831 Diegem • Belgium Tel: +32 2 456 07 80
Fax: +32 2 456 07 89 E-mail: [email protected]
Web: www.bannereurope.com
BANNER ENGINEERING EUROPE
E-A079 – 02/2007
Authorised distributor:
SAFETY SENSORS VISION
Objective: To detect registration marks on food packaging.
Description: The R58 Expert automatically chooses one
of three sensing LEDs – red, green or blue to maximise
contrast when detecting registration marks.
Registration Mark Detection
Objective: To identify splices on a roll of paper.
Description: The highly sensitive R58 Expert detects the
inconspicuous splice in a roll of paper, ensuring that the
printer skips over the splice.
Splice Detection in a Paper Roll
On-axis or right-angle
lens position possible
Power LED
Dynamic TEACH (+)
Push Button
Dark Operate LED
Light Operate LED
Static TEACH (-)
Push Button
Output LED
ON-Delay
Switch Point
8-Segment
Light Bar
Objective: To detect registration marks on tubes for
correct positioning before filling.
Tube Registration Mark Detection
Versions available with
M12x1 connector (5-pin)
or cable
Horizontal spot position
3 LED colours
available
Vertical spot position