Setting the clock (date and time), Determining installed software licenses – Brocade Communications Systems Brocade VDX 8770-4 User Manual

Page 49

Advertising
background image

Brocade VDX 8770-4 Hardware Reference Manual

29

53-1002563-02

Determining installed software licenses

3

Setting the clock (date and time)

The following procedure sets the local clock date and time. An active NTP server, if configured,
automatically updates and overrides the local clock time. Time values are limited to between
January 1, 1970 and January 19, 2038.

NOTE

You should set the clock only if there are no NTP servers configured. Time synchronization from NTP
servers overrides the local clock.

1. If necessary, log in to the switch using the default password (the default password is

password). Be sure you are in privileged EXEC mode.

2. Enter the clock set year-month-dayT hours:minutes:seconds command.

The following example sets the clock to March 17, 2012, 15 minutes past noon.

switch# clock set 2012-03-17T12:15:00

If you want to show the clock and time zone settings, use the show clock [rbridge-id rbridge-id | all]

command.

switch# show clock

rbridge-id 1: 2012-03-17 12:15:00 America/Los_Angeles

Determining installed software licenses

Certain licenses are factory installed on the Brocade VDX 8770-4. To determine which licenses are
enabled, use the show license command. The format of the command is show license [rbridgeId
rbridgeID | all]. You can also use just show license.

switch# show license

RbridgeId: 1

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

FCoE Base license

Feature name:FCOE_BASE

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Layer 3 license

Feature name:LAYER_3

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

VCS Fabric license

Feature name:VCS_FABRIC

Each license key is represented by a string of x characters in the example above. Keep a copy of
each license key for reference.

You can display the switch license ID, which is required for installing a new license. Use the
command show license id [rbridgeId rbridgeID | all]. You can also use just show license id.

switch# show license id

RbridgeId

LicenseId

========================================

1

10:00:00:05:1E:00:4C:80

Advertising