Brocade Communications Systems Brocade VDX 8770-4 - Manual (Page 94)

74 Brocade VDX 8770-4 Hardware Reference Manual
53-1002563-02
Power cords
A
The ports meet all required safety standards. For a listing of these standards, refer to “Regulatory
compliance.”
Power cords
The types of power cords provided with the Brocade VDX 8770-4 are specific to the country where it
is installed. For each of the types of power cords in
Table 23 , the end that connects to the Brocade
VDX 8770-4 has an IEC 60320/C19 cable connector. The AC power receptacles on each power
supply are equipped with IEC 60320/C20 power connectors.
In order to connect to a power strip already installed in a cabinet, the C20, 20A-250V, 12 AWG
power cord is required.
To order a power cord, contact your Brocade VDX 8770-4 supplier.
10 GbE twinax Copper 1 m (3.3 ft)
3 m (9.8 ft)
5 m (16.4 ft)
40 GbE 850 MMF 50 100 m (984.3 ft)
TABLE 22 Supported optics (Continued)
Speed Wavelength Fiber type Cable core diameter
(microns) Maximum cable distance
TABLE 23 Power cord types (international)
Country Plug style
NEMA 5-20P
125V only
USA, Canada,
Mexico, other
locations NEMA L6-20
USA, Canada,
Mexico, other
locations CEE-7/7
“Schuko”
Continental
Europe BS-1363A AS 3112
Australia/New
Zealand IEC-60309
32A-6h, 230V~ C20
20A-250V
12 AWG
connect to
in-cabinet
power strip only
All locations
Argentina X X
Australia X X
Austria X X
Bahrain X X
Belgium X X
Brazil X X X