5 kvm ports tab – Belkin OmniViewIP 5000HQ User Manual
Page 43
39
OmniView IP 5000 HQ
sections
1
3
5
7
9
11
13
15
17
19
2
4
6
8
10
12
14
16
18
20
21
15
ManaGeMenT
8 .5 KVM Ports tab
In the “KVM Ports” tab, you:
• Associate the KVM switches in the system to the relevant IP device.
• Associate targets with the relevant IP device/port number on the
KVM switch.
Click the “KVM Ports” tab, the following appears.
Figure 55 Configuring KVM over IP – KVM Ports tab
The KVM switch drop-down list consists of pre-selected KVM switches.
You must select all the KVM switch types physically connected to the
system; this is done in the “Settings” part of the menu and is explained
in the “KVM switches” section on page 52. Select the KVM switch model
(if any) physically connected to this IP device. The number of ports in the
selected KVM switch appears in the “Ports” section.
notes:
When using an OmniView 5216/32K Switch, “Internal” is selected by default
and cannot be altered.