1 uploading a new serial console model – Belkin OmniViewIP 5000HQ User Manual
Page 58
Advertising
54
OmniView IP 5000 HQ
sections
1
3
5
7
9
11
13
15
17
19
2
4
6
8
10
12
14
16
18
20
21
19
seTTInGs – aTTaCHeD DeVICes
10 .3 .1 Uploading a new serial console model
If a console server model is not listed, contact Belkin at support@belkin.
com to obtain a new console server definition file (SDF).
When you receive the file, do the following:
1. Save the console server model file on your computer’s hard disk.
2. Log in to OmniView IP 5000HQ as an administrator.
3. From the “Console Servers” page (see figure on previous page),
press
to locate the console server model file (SDF.XML).
4. Press
. The file uploads with the new switch type added
to the list.
5. Select the console server model type and click
.
Advertising