Belkin OmniViewIP 5000HQ User Manual
Page 60
56
OmniView IP 5000 HQ
COnfIGUrInG aCCess serVICes – InTrODUCTIOn
sections
1
3
5
7
9
11
13
15
17
19
2
4
6
8
10
12
14
16
18
20
21
11 .1 .2 belkin serial Console server
Click “Single Port Console Server”. The Single Port Console Server
settings appear; see Figure 68.
Figure 68 Single Port Console Server settings
Description – Description of the Access Service: Single Port
Console Server
Url/Host – IP address of Console Server
Port – For Belkin Serial Console Server, TCP port number is 4000.
application – PuTTy.exe is application used and it must be installed on
all client computers; see the paragraph below.
The PuTTy application can be obtained from:
http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
Path – PuTTy application must be installed on all client computers,
preferably in the same path. In the default path %ProgramFiles%\PuTTy
(see Figure 68), the application could be in any drive in the Program
Files\PuTTy folder. See the general notes above about variables.