7 vnc – Belkin OmniViewIP 5000HQ User Manual
Page 65
61
OmniView IP 5000 HQ
COnfIGUrInG aCCess serVICes – InTrODUCTIOn
sections
1
3
5
7
9
11
13
15
17
19
2
4
6
8
10
12
14
16
18
20
21
Description – Description of the access service: SSH
application – PuTTy.exe is the application used for SSH access. The
PuTTy application can be obtained from:
http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
PuTTy application Path – PuTTy application must be installed on
all client computers, preferably in the same path. In the default path
%ProgramFiles%\PuTTy (see Figure 74), the application could be in any
drive in the Program Files\PuTTy folder. See the general notes above
about variables.
Url/Host – Type the URL/host of the SSH resource.
Port – The SSH port number is 22 (default).
login Method:
• Prompt for Credentials – This means the SSH login page appears
and you log in manually.
• Use OmniView IP HQ Credentials – This means OmniView IP
5000HQ logs in to SSH with the currently logged user credentials.
Ensure that SSH is configured to recognize the same user name
and password.
• Use the Following Credentials – Where the user name and password
are different for OmniView IP 5000HQ and SSH, select this option.
User name and password fields appear. Type the SSH user name
and password. OmniView IP 5000HQ logs in to SSH using this
user name and password.
11 .1 .7 VnC
note! OmniView IP 5000HQ currently supports RealVNC free edition
and other free VNC compilations (TightVNC and UltraVNC).
Click “VNC”. The following are the default settings for VNC.
Figure 75 VNC – VNC Client mode