8 telnet – Belkin OmniViewIP 5000HQ User Manual
Page 67
63
OmniView IP 5000 HQ
COnfIGUrInG aCCess serVICes – InTrODUCTIOn
sections
1
3
5
7
9
11
13
15
17
19
2
4
6
8
10
12
14
16
18
20
21
11 .1 .8 Telnet
Click “Telnet”. The following are the default settings for telnet.
Figure 77 Telnet
Description – Description of the Access Service: Telnet
application – PuTTy.exe is the application used for telnet access. The
PuTTy application can be obtained from:
http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
PuTTy application Path – PuTTy application must be installed on
all client computers, preferably in the same path. In the default path
%ProgramFiles%\PuTTy (see Figure 77), the application could be in any
drive in the Program Files\PuTTy folder. See the general notes above
about variables.
Url/Host – Type the URL/host of the telnet resource.
Port – The telnet port number is 23 (default).