Philips 50PF9830A-37B - Manual (Page 20)

16
Trademark notice:
In the United States, TV Guide and other related marks are registered marks of Gemstar-TV Guide International, Inc. and/or
one of its affiliates. In Canada, TV Guide is a registered mark of Transcontinental Inc., and is used under license by Gemstar-TV
Guide International, Inc.
License notice
The TV Guide On Screen system is manufactured under license from Gemstar-TV Guide International, Inc. and/or one of its
affiliates.
Patent notice
The TV Guide On Screen system is protected by one or more of the following issued United States patents 6,498,895,
6,418,556, 6,331,877; 6,239,794; 6,154,203; 5,940,073; 4,908,713; 4,751,578; 4,706,121.
Disclaimer notice
Gemstar-TV Guide International Inc. and/or its related affiliates are not in any way liable for the accuracy or availability of the
program schedule information or other data in the TV Guide On Screen system and cannot
guarantee service availability in your area. In no event shall Gemstar-TV Guide International, Inc. and/or its related affiliates be
liable for any damages in connection with the accuracy or availability of the program schedule information or other data in the
TV Guide On Screen system.
TV Guide On Screen* Set up
The TV Guide On Screen system is a free interactive program guide that allows you to view and search
TV listings, read program information, and set reminders and recordings for programs you don’t want to
miss.The TV Guide On Screen system supports cable-ready, cable box and digital cable services as well as
over-the-air broadcast. It does not provide listings for satellite services.TV Guide program data and
schedules are updated daily through your antenna or cable system once you have completed the TV Guide
On Screen setup.
Note: In order to receive the most recent and accurate TV Guide On Screen system program information, your TV
must be turned off (typically overnight). All displays and information contained in the TV Guide On Screen system
are in English.
Remark: If you have a VCR/DVR or Cable Box Converter you must connect the G-LINK cable prior to starting Setup.
Connecting the G-LINK cable lets you program recordings and/or select TV shows directly through the TV Guide On
Screen system. See p. 59.
& Press the MENU button on the remote control and navigate to Installation,TV Guide On Screen.
é Press the OK button.
The Installation menu disappears and the TV
Guide On Screen system setup procedure
starts up.The setup consists of a series of
interactive menus.
“ Follow the on-screen setup instructions, and
confirm, where necessary, with the
OK button.
Note that some features and TV Guide On
Screen functions will not be available if you do
not setup TV Guide On Screen.
‘ When the Setup is complete, the TV
Installation menu returns.
Power off the TV overnight or when not in use to allow the TV Guide On Screen system to receive and
update its listings. Keep your antenna or cable TV signal plugged in. If a cable box is connected to this TV,
leave the cable box turned on at all times.
Program listings should start displaying within 24 hours after setting up the TV Guide On Screen system. It
may take up to one week to receive all eight days of initial program listings.
To operate TV Guide On Screen, see TV Guide On Screen operation, p. 35.
Settings
TV
Setup
Installation
(CableCARD applications)
Demo
Exit
Installation
Language
Autoprogram
Weak channel installation
TV Guide On Screen
Software upgrade
Info
2496.1 16x24 en 14-12-2005 10:11 Pagina 16