Philips 50PF9830A-37B - Manual (Page 76)

Automatic software upgrade procedure
& Power off your TV and remove all memory
devices.
é Insert the USB portable memory that contains
the downloaded software upgrade.
“ Switch on your TV with the POWER button
on your remote control.
‘ At startup the TV will scan the USB portable
memory until it finds the update content.The
TV will automatically go to the upgrade mode.
After a few seconds it will display the status of
the upgrade procedure.
Warning :
• You are not allowed to remove the USB portable memory during the software upgrade procedure!
• In case of a power drop during the upgrade procedure, don’t remove the USB portable memory from the TV.
The TV will continue the upgrade as soon as the power comes back.
• If you try to upgrade to a software version lower than the current version, a confirmation will be asked.
Downgrading to older software should only be done in case of real necessity.
• If an error occurs during the upgrade you should retry the procedure or contact your dealer.
( When the software upgrade was successful, remove the USB portable memory and restart your TV
with the
POWER button on your remote control.
Your TV will start up with the new software.
Note: Once the upgrade is finished use your PC to remove the TV software from your USB portable memory.
72
Manual software upgrade procedure
For a manual software upgrade copy the “autorun.upg” file in a directory called “Upgrades” located in
the root of the USB portable memory.
& Insert the portable memory that contains the
downloaded software upgrade.
é Select Software Upgrade in the Installation
menu. Go to Local upgrades/applications .
The TV will list all compatible images available
on the USB portable memory and display the
data for each selected upgrade image.
“ Select the correct upgrade image and press the
red color button to start the upgrade.
Your TV will restart and will automatically go
to the upgrade mode. After a few seconds it
will display the status of the upgrade
procedure.
Warning : If you try to upgrade to a software
version equal or lower than the current version, a
confirmation will be asked. Downgrading to older
software should only be done in case of real
necessity.
‘ When the software upgrade was successful, remove the USB portable memory and restart your TV
with the
POWER button on your remote control.Your TV will start up with the new software.
Software upgrade
Current software info
Local upgrades/applicat.
Info
Settings
Installation
Language
Autoprogram
Weak channel installation
TV Guide On Screen
Software upgrade
2496.1 16x24 en 14-12-2005 10:11 Pagina 72