English, Jack, such as, Outputs on the back of the cable box and to the – Philips 50PF9830A-37B User Manual

Page 9: Video (labeled, Labeled, Signal source is selected. • press the, Button to confirm your selection.the

Advertising
background image

5

English

- Cable box with A/V outputs

• Connect the incoming cable TV signal 1 to a signal splitter (not

supplied).The signal splitter enables you to avoid having to use the
TO TV jack on the back of the cable box.This jack will not supply
stereo sound to the TV.
Note:Your cable box may have a different label for the

TO TV

jack, such

as

OUTPUT

or

OUT

.

• Connect a coaxial cable (not supplied) to a connector on the signal

splitter and to the

CABLE/ANTENNA 75

x jack 2 on the TV.

• Connect another coaxial cable (not supplied) to a connector on the

signal splitter and to the cable

IN

jack 3 on the back of the cable

box.

• Connect A/V cables (not supplied) to the

VIDEO

and

AUDIO L

and

R

outputs on the back of the cable box and to the

AV2

video

(labeled

VIDEO

) and

AUDIO

(labeled

L

and

R

) jacks 4 on the

back of the TV.

• To view programs from your cable box, first press the

AV+

button

on the remote control.

• Press the cursor down or up buttons until the

AV2

signal source is

selected.

• Press the

OK

button to confirm your selection.The

AV2

input

source becomes current for the viewing of cable TV programs
through your cable box.

Note: If your cable box Audio/Video outputs will not supply video and
stereo audio to the TV, you will need to make the connection shown above
in the example “Cable box with

RF IN/OUT

”.

- Cable box with S-Video, component video (YPbPr) or HDMI

connectors

See Connect Accessory Devices, p. 56-58.

75

L

Pr

H

R

Pb

V

DIGITAL
AUDIO
IN

Y

R

L

Pr

Pb

Y

S-VIDEO

S-VIDEO

AV2

AV3

MONITOR OUT

AV1

VIDEO

G-LINK

DIGITAL
AUDIO
OUT

VIDEO

CABLE / ANTENNA

L

R

VIDEO

SIGNAL

SPLITTER

STB

OUT

IN

3

2

4

CABLE

AV2 :
L + R + VIDEO

1

Watching Cable TV programs that don’t require the cable box

Since you’ve connected the cable TV signal directly to the TV’s tuner, you
can also watch the unscrambled programs by simply tuning to the
desired channel.You must first use Autoprogram, however, to store
channels in the TV’s memory. See page 14.

Note: This connection will supply stereo sound to the TV if it is being broadcast
by the station you are watching.

2496.1 16x24 en 14-12-2005 10:11 Pagina 5

Advertising