English – Philips 50PF9830A-37B User Manual

Page 67

Advertising

English

Expert mode
When you do not want the remote to go back to TV mode, and to stay in the mode selected, proceed as
follows:

Select TV mode with the

SELECT

button.

Press the

SELECT

button again simultaneously with the

button for at least 2 seconds.

“

Select the desired mode with the

SELECT

button.

The remote will not go back to TV mode from now on and will remain in the mode selected.To go back
to the default setting of the remote (TV mode) repeat what is explained above, selecting the TV mode.

Note: LED behavior

- If the LED blinks

once

after pressing the

SELECT

button simultaneously with the

button for at least 2

seconds, the remote control is in

Expert mode

and the remote control remains in the mode selected.

- If the LED blinks

4 times

after pressing the

SELECT

button with the

button for at least 2 seconds, the

remote control is in

Normal mode

and the remote control returns to TV mode after 60 seconds.

Direct selection of a connected device

When the remote is in

TV Expert mode

you may directly select a connected device in the following way:

Press the

AV+

button:

- followed by digit ‘