Fluid Management 1500HS Accutinter - Manual (Page 21)

Fluid Management Customer Service 1 . 800 . 462 . 2466

Accutinter 1500 | 19
Getting Started
Preparing the system
After you have filled the canisters and updated the software, you must do an initial dispense to make sure
the Accutinter is working properly.
Smart Purge
Use “Smart Purge” for daily Purging.
This will only purge colorants that
have not been recently used.
1
From any screen choose Maintenance (F3 or F11).
2
Click on the
Purge tab.
3
Purge colorants.
Click on the
colorant to be
purged or select
ALL button to
purge entire
system. Click the
Purge (F3) button.
5
Click Dispense (F2).
Colorant(s) will dispense.
Prompt will appear
confirming dispense.
4
Place a container
underneath the nozzle
with nozzle closer
open.
NOTE: In the
Accutinter 1500
HS, the nozzle will
open automatically
after step 5. At this
point, just place the
container aligned
with the nozzle tip.
6
Click Done (Esc).