Fluid Management 1500HS Accutinter - Manual (Page 32)

Fluid Management Customer Service 1 . 800 . 462 . 2466

30 | Accutinter 1500
1
Click on Agitate
tab. In the Duration
in Minutes (F4)
field, type in
the amount of
time colorants
should stir.
2
Click Agitate (F2)
to begin agitation
cycle. Progress bar
will appear confirming
agitation cycle. Click
Done (Esc).
NOTE:
The default cycle is 30 seconds per
hour. Fluid Management recommends 4 minutes
for manual agitation.
Basic Operations
Stirring the colorants
When adding new colorants or if the colorant has not been used for several days, you may want to
manually stir colors. From any screen, choose
Maintenance (F3 or F11). The Agitate tab allows you to
stir colorants in the canister.