SkyTrak 10054 Operation Manual - Manual (Page 100)

98 Model 10054 Rev 3/02
Emergency Operations
1. Clear the area of any unnecessary personnel.
2. Place the travel select lever in (N) NEUTRAL, move the neutral lock
lever to NEUTRAL LOCK position and engage the parking brake
switch.
3. Block all four wheels.
4. If the load is in a position where it can be removed safely, com-
pletely remove the load from the carriage and/or attachment; other-
wise, leave the load in place.
5. Temporarily block up or support the outer boom.
6. Replace the failed hydraulic line with a new part (Figure 66).
7. Check the hydraulic oil level, add oil if needed.
8. Remove the blocking or support from the outer boom.
9. Return to the cab, fasten your seat belt and start the engine.
10. Tilt the carriage and/or attachment upward if necessary for clear-
ance before retracting the boom.
11. Slowly retract the boom.
12. Slowly lower the boom and ground the carriage and/or attachment.
13. Shut off the engine.
14. Completely remove the load from the carriage and/or attachment if
you haven’t already done so.
15. Return to the cab, fasten your seat belt and start the engine.
STEP 1
WARNING:
DO NOT get under a raised boom unless the
boom is blocked up. Always block the boom before doing any ser-
vicing that requires the boom to be up.
WARNING:
Wear protective clothing and proper eye pro-
tection when working with or around hydraulic oil. Wait for hydrau-
lic oil to cool before attempting to repair the failure. Hot hydraulic
oil can cause severe burns and other serious injury.
98
Model 10054 Rev 3/02
EmergencyOperations
1.Cl ear the are aof any unnec essa ry pers onnel .
2.P la ce th etr av el selec tle ver in( N)N EUTRA L,mo veth eneut ra llo ck
le ve rto NEUTRA LL OCK pos ition andeng agethe park ing brak e
swit ch .
3.B lo ck all fourwh eels.
4.If theloa di sin apo sitio nwh ere it can be rem oved safe ly, com-
plet elyr emov ethe load fro mth ec arri age and/o ra ttachm ent;oth er-
wis e,l eave the load inpl ace.
5.T empor ari ly bloc kup or suppor tt heo uter boom .
6.Re place thefai led hydr aulic lin ewi tha new part (F igur e6 6).
7.Ch eck the hy dra ulic oil lev el,add oil if neede d.
8.Re move theb lock ing ors uppor tf rom the outer boom.
9.Re turn to thec ab,fas tenyou rse atb eltand star tt heeng ine.
10. Tilt th eca rriag ea nd /or att ac hm ent up wa rd if nec essa ryf or cle ar-
anc ebe fore retr acti ngthe boom.
11. Slo wly re tra ctt he boo m.
12. Slo wlyl owerth ebo omand groun dt he car riag ean d/ora ttachm ent.
13. Shut offthe engi ne.
14. Co mpl etely remo vethe load fro mth ec arri age and/or attac hment if
yo uhav en’t alr eady done so.
15 .R etur nt ot hec ab,fas tenyou rse atb eltand star tt heeng ine.
STEP 1
WA RNING:
DON OT ge tu nde ra rai sed bo om unl ess the
boom isb loc ke du p. Alw ay sb loc kt heboom befo re doing any ser -
vic ing th atr equi re st heb oomto be up .
WA RNING:
We arpr otect ive clo thing and pro pere ye pro -
tect ionwhen wo rk ing wit ho ra round hy drau lic oil. Wa it for hy drau-
lic oil to cool befo re attempt ingto re pair the fai lu re. Hoth ydr auli c
oil ca nc ause se ver eb urns and other ser io usi njur y .