SkyTrak 8042 Service Manual - Manual (Page 151)

Boom
3.90 Model 8042, 10042, 10054 Legacy Rev. 03/04
41. On the left side of the outer boom, remove the
locknut (1), angle indicator (2) and flat washers (3)
from the weld stud. Save the angle indicator and all
the hardware for reassembly.
42. Remove the extend and retract bulkhead fittings (4)
from the mounting plate on the right side of the outer
boom assembly.
43. Remove the Attachment Tilt bulkhead fittings (5)
from the mounting plate on the left side of the outer
boom assembly.
44. Remove the auxiliary hydraulic bulkhead fittings (6).
45. Inspect all fittings (4, 5 and 6) for damage. If the
fittings or threads are damaged, the fittings should
be replaced.
3.6.5 Outer Boom Installation
1. On the rear of the boom, assemble the extend and
retract bulkhead fittings (7) to the mounting plate on
the right side. Insert the fittings from the bottom up
and secure in place with the bulkhead fitting nuts (8)
on the top side. Tighten securely. Keep the caps on
the threaded ends of the fittings to protect the
threads from damage and to keep dirt and debris out
of the fittings.
2. On the rear of the boom, assemble the Attachment
Tilt bulkhead fittings (9) to the mounting plate on the
left side. Insert the fittings from the bottom, into the
set of holes closest to the boom and secure in place
with the bulkhead fitting nuts (10) on the top side.
Tighten securely. Keep the fittings capped to protect
the threads from damage and to keep dirt and debris
out of the fittings.
3. Assemble the auxiliary hydraulics bulkhead
fittings (11) to the mounting plate on the left side.
Insert the fittings from the bottom, into the outer set
of holes and secure in place with the bulkhead fitting
nuts (12) on the top side. Tighten securely. Keep the
fittings capped to protect the threads from damage
and to keep dirt and debris out of the fittings.
MH1300
1
2
3
MH1310
4
5
6
WARNING:
Wear protective footwear
with reinforced toe caps and slip-resistant soles.
Failure to comply can result in foot or other
bodily injury from crushing, slipping or falling.
WARNING:
NEVER lift a heavy object
without the help of at least one assistant or a
suitable sling and hoist. Failure to comply can
result in death or serious personal injury.
MH1310
7
8
9
10
11
12