B. lower the boom to exactly 45, D. frame sway the vehicle back to 0, A. depress the service brake pedal – SkyTrak 8042 Service Manual User Manual

Page 863: B. disengage the parking brake switch, E. the stabil-trak™ light should go off, B. move the travel select lever to (f) forward, J. frame sway the vehicle back to 0, K. depress the service brake pedal, L. shift the travel select lever to (n) neutral, M. lower the boom

Advertising
background image

Stabil-TRAK™ System and Boom Interlock System

10.22

Model 8042, 10042, 10054 Legacy

Rev. 10/03

Step 7

a. With the parking brake switch ON, move the travel select lever to the (N) NEUTRAL position.

b. Lower the boom to exactly 45°.

c. Frame sway the vehicle no more than 5° to the left.

d. Frame sway the vehicle back to 0°.

e. Frame sway the vehicle no more than 5° to the right.

Note: Observe that frame sway will be slower than normal during this test.

f. The Stabil-TRAK™ light should remain ON and the front left tire should remain off the ground. The

front left tire should not raise or lower during frame sway.

g. Frame sway back toward 0°, leaving the vehicle swayed to the right approximately 1° to 2°.

Step 8

a. Depress the service brake pedal.

b. Disengage the parking brake switch.

c. With the range select lever in (1) FIRST gear, move the travel select lever to the (R) REVERSE

position.

d. Release the service brake pedal to deactivate the Stabil-TRAK™ system.

e. The Stabil-TRAK™ light should go OFF.

f. The front left tire should return to the ground while the vehicle travels in reverse.

g. Depress the service brake pedal to stop the vehicle.

Step 9

a. With the service brake pedal depressed and the boom angle at exactly 45°, move the range select

lever to (3) THIRD gear.

b. Move the travel select lever to (F) FORWARD.

c. Release the service brake pedal to deactivate the Stabil-TRAK™ system. The Stabil-TRAK™ light

should go OFF.

d. Slowly drive the vehicle forward against the block to stop the vehicle from moving forward.

e. With the front left tire against the block, frame sway the vehicle no more than 5° to the left.

f. Check that the front left tire remains on the ground. It is normal for the front left tire to raise slightly

when swaying to the left, but the tire should immediately lower when the frame sway function is
stopped.

g. Frame sway the vehicle back to 0° and pause briefly.

h. Frame sway the vehicle no more than 5° to the right.

i. Check that the front right tire remains on the ground. It is normal for the front right tire to raise

slightly when swaying to the right, but the tire should immediately lower when the frame sway
function is stopped.

j. Frame sway the vehicle back to 0°.

k. Depress the service brake pedal.

l. Shift the travel select lever to (N) NEUTRAL.

m. Lower the boom.

Stabil-TRAK System Test Procedures

LOCKE

D M

O

D

E

SL

O

W

PIV

O

T

MO

D

E

SL

OW

PI

VO

T

MO

D

E

LOCKE

D

MO

DE

Advertising
This manual is related to the following products: