Wall wires wall anchor ct100, Mount the ct100 to wall, Place wires like this screw to wall – 2GIG CT100 User Manual
Page 7
Advertising
6
PG
7
Mount the CT100 to Wall
1. Hold the CT100 against the wall, with the wires coming over the top;
above terminal block. The CT100 will cover the hole in the wall.
2. Position CT100 for best appearance.
3. Attach the CT100 to the wall with the screws provided.
4. If you are mounting the CT100 to sheet rock or if you are using the
old mounting holes, use the plastic anchors provided.
5. Mark irst and drill a 3/16-in.(4.8mm) hole for the insert at each screw
location, then mount the unit.
C
G
Y
H
C
G
Y
H
C
G
Y
H
C
G
Y
H
C
G
Y
H
C
G
Y
H
Wall
Wires
Wall
anchor
CT100
from
HEAT/COOL
system
C
WY
RH G
Place wires like this
Screw to wall
Advertising