Apple Logic Pro X User Manual
Page 351
Chapter 12
Edit MIDI regions in the Piano Roll Editor
351
This option helps you avoid accidentally transposing notes when moving them horizontally,
or changing their time position when moving them vertically. The initial direction—vertical or
horizontal—restricts movement to this plane while the mouse button is pressed. Release the
mouse button and click the event to move in the other direction.
Move notes using key commands
Use any of the following key commands:
m
Nudge Region/Event Position Right by SMPTE Frame
m
Nudge Region/Event Position Left by SMPTE Frame
m
Nudge Region/Event Position Right by 1/2 SMPTE Frame
m
Nudge Region/Event Position Left by 1/2 SMPTE Frame
m
Nudge Region/Event Position Right by 5 SMPTE Frames
m
Nudge Region/Event Position Left by 5 SMPTE Frames
m
Nudge Region/Event Position Right by SMPTE Bit
m
Nudge Region/Event Position Left by SMPTE Bit
m
Nudge Region/Event Position Right by Tick
m
Nudge Region/Event Position Left by Tick
m
Nudge Region/Event Position Right by Division
m
Nudge Region/Event Position Left by Division
m
Nudge Region/Event Position Right by Beat
m
Nudge Region/Event Position Left by Beat
m
Nudge Region/Event Position Right by Bar
m
Nudge Region/Event Position Left by Bar
m
Nudge Region/Event Position Right by Nudge Value
m
Nudge Region/Event Position Left by Nudge Value
m
Nudge Region/Event Position Right by Sample
m
Nudge Region/Event Position Left by Sample
m
Nudge Region/Event Position Right by 1 ms
m
Nudge Region/Event Position Left by 1 ms
m
Nudge Region/Event Position Right by 10 ms
m
Nudge Region/Event Position Left by 10 ms
The selected events are shifted one step right or left, by the unit defined in the particular
key command.
Move other MIDI data along with notes
m
Choose the Include Non-Note MIDI Events setting from the Piano Roll Editor Functions menu to
tie other data (such as pitch-bend, modulation, aftertouch, or poly pressure) in a region to the
region’s notes.