Apple Logic Pro X User Manual
Page 48
Chapter 2
Get started with Logic Pro X
48
Open the Mixer
m
Click the Mixer button
in the control bar (or press X).
The Mixer opens below the Tracks area.
Mute and unmute a channel strip
m
Click the channel strip’s Mute button (with an “M”).
Click the button again to unmute the channel strip.
Solo and unsolo a channel strip
m
Click the channel strip’s Solo button (with an “S”).
When you solo a channel strip, the Mute buttons of all unsoloed channel strips flash.
Click the button again to unsolo the channel strip.
Adjust track volume using a channel strip
m
Drag the Volume fader up or down.
Adjust track pan or balance using a channel strip
m
Drag the Pan control vertically.
Choose a channel strip setting
m
Click-hold the Setting button at the top of the channel strip, then choose a setting from the
pop-up menu.