Apple Logic Pro X - Manual (Page 427)

Chapter 15 Advanced edit features 427
Edit multiple steps in a linear fashion
1 Select the Line tool.
2 Command-click a position on the lane.
A help tag appears, showing the exact position and event (step) value in the top line.
3 Move the mouse to the end point of the line. This can be to the right or left.
As you move the mouse, you see a line trailing behind the Line tool, with the exact position and
event value shown in a help tag.
4 Click the end point to change the values of several event beams, aligned along the line.
Create or alter a linear series of steps in sections
1 Select the Line tool.
2 Command-click a position on the appropriate lane.
A help tag appears, showing the exact position and event value in the top line.
3 Move the mouse to the end point of the line (to the right or left).
As you move the mouse, you see a line trailing behind the Line tool, with the exact position and
event value shown in a help tag.
4 Command-click the end point.
Another line is immediately drawn from the end point of the original line.