Apple Logic Pro X - Manual (Page 512)

Chapter 16 Mix a project 512
Insert and set up a multi-output instrument
1 Click-hold the respective Instrument slot, then choose the multi-output instance from the
pop-up menu.
The first two outputs of a multi-output instrument are always played back as a stereo pair by the
instrument channel strip that the plug-in is inserted into. Additional outputs (3 and 4, 5 and 6,
and so on) are accessed via aux channel strips.
2 In the plug-in window, set up the output routing for individual sounds or samples. This is
generally done using a pop-up menu with entries such as Main, 3-4, 5-6, and so on.
3 In the Mixer, click the Add button (+) of the instrument channel strip that you inserted the multi-
output instrument into.
Note: The Add button (+) appears only on multi-output instrument channel strips.